JUMPING CUSHION

Productimage_506300

Certified as per DIN 14151, part T1 and T3. Recommended for a maximum jumping height of 16 metres, that means approx. from the seventh floor of a building. Due to the low weight of approx. 55 kg, the jumping cushion can be relocated rapidly in case of need. The jumping cushion is used in rescue operations, where turntable ladders are not available or cannot be deployed because of space restrictions, for instanse in narrow streets. The self-erecting supporting frame is made of a coated fabric. The cover is made of a special flame resistant, tear-proof and rot-proof material. A 300 bar, 6-litre compressed-air cylinder, that is available at extra cost, is located in a protective pocket at the base of the supporting frame. Only two people are necessary to set up the jumping cushion. The supporting frame and the actual jupmping cushion will be ready for service in less than 30 seconds. After a jump, the cushion is re-erected within 10 seconds and ready for the next jump.

  • Catching area: 3,500 x 3,500 mm (12.25 m²)
  • Height, inflated: 1.7 m
  • Air capacity, inflated: 20 m³
  • Deployment time: 30 seconds
  • Re-erection time: 10 secons
  • Colour: neon yellow - blue
  • Packed size: 0.9 x 0.55 x 0.3 m (complete with carrying bag)
  • Weight: 45 kg (without air cylinder) ( 408930 )
item no. 506300

also suitable / additional products

Productimage_506310
TEST PRESSURE GAUGE
506310
add
Productimage_506315
AIR RETRACTOR FOR VETTER JUMPING CUSHION
506315
add