- PRODUCTENUitrusting
- Brandweerhelmen
- Beschermende kleding
- Inzethandschoenen
- Inzetlaarzen
- Stroomgeneratoren
- Hoogvermogenventilatoren
- Mobiele ventilatoren
- Dompelpompen
- Warmtebeeldcamera's
- Led-verlichtingssysteemen
- Uitrusting voor gevaarlijke goederen en ontsmetting
- Overige bepakkingsproducten
- Digitale Catalogus Bepakkingsmaterialen
- FAQs
Blussystemen- Draagbare pompen
- Hogedrukblussystemen
- POLY-blussystemen
- Inbouwpompen
- Schuimmengsystemen
- CAFS-systemen
- Straalpijpen en monitoren
- Kanonnen
- Blusarm STINGER
- Motorpompaggregaten
- VOERTUIGEN
- SERVICE
- Innovation
- NIEUWS
- CONTACT
- Group
NL
GLOROS T1
The glove for technical rescue operations
Maximum wearing comfort with optimum grip
The new GLOROS T1 was specially developed for use in technical rescue operations. Certified according to EN 388, it offers the best protective properties against mechanical dangers like punctures, cuts, and abrasions, etc. Whether it's work on vehicles involved in accidents or other fire fighting activities - the GLOROS T1 is the right glove for your protection. But the gloves do not protect against chemical, electrostatic, and thermal hazards. Specifically, this glove is not intended for use in fire operations (our proven SAFE GRIP 3 models are available for this). However, GLOROS T1 offers a certain basic protection against contact heat up to 250 °C (according to EN407).
Thoroughly thought through. For comprehensive safety.
Thanks to its special construction and sophisticated design details (moving finger folds, intermittent silicone coating on the palm, neoprene inserts on the knuckles, etc.) the GLOROS T1 ensures maximum wearing comfort and touch sensitivity. The special silicone coating on the palm ensures an optimal grip on wet and smooth surfaces.
The cut-resistant insert made of KEVLAR® completely envelops the fingers, providing "all-round cut protection" (not just in the palm area!).
The elastic band on the wrist serves for protection against glass splinters and dirt penetrating inside the glove.
Inside
- Black mixed fabric of elastane and polyamide with silicone print for excellent grip on smooth and wet surfaces
Back of the hand
- Made of red mixed nylon fabric with elastane and neoprene over the knuckles
Lining
- Cut-resistant KEVLAR® with
Performance levels in accordance with EN 388 and EN 407
The GLOROS T1 firefighting glove meets all requirements of fhe guidelines EN 388:2016 and EN 407:2020 contact heat Level 2 (up to 250 °
| Parameters | Requirements | Result |
|---|---|---|
| Abrasion resistance | EN 388 | 4 |
| Cut resistance | EN 388 | 5 |
| Tear resistance | EN 388 | 4 |
| Puncture resistance | EN 388 | 3 |
| Cut resistance | EN ISO 13997 | D |
| Dexterity | EN 420 | 5 |
| Contact heat | EN 407 | 2 |
The performance levels were confirmed after 25 wash cycles (40 °C).
Note: These gloves offer no protection against bacterial, chemical, electrical, or thermal hazards.
Gallery
Download
Data sheet GLOROS T1
(EN / 763.1 KB)
User information GLOROS T1
(EN / 1.0 MB)
Contact
Wilt u nu meteen iemand spreken? Wij staan altijd klaar om vragen van onze klanten zo snel mogelijk te beantwoorden. U kunt het beste uw naam en telefoonnummer achterlaten, met opgaaf van waarover u meer wilt weten. Wij bellen u dan terug op een moment dat u schikt.
Vragen om terugbellen