H5

Hochdruckpumpe 

Extinguishing with the highest degree of efficiency

The compact dimensions and the low weight make the H5 high pressure pump unsurpassed as a built-in underfloor pump for small vehicles. This configuration creates additional space for equipment rooms - an unbeatable advantage for small-size vehicles.

 

Uncompromising and equipped with all benefits of Rosenbauer pumps - this high pressure fire pumps are the first choice for small-size vehicles.

Impresses with

  • Best extinguishing effect thanks to high pressure
  • Small size
  • Highest priming performance and automatic priming
  • Mechanical overheat protection

Efficient extinguishing technology for small vehicles

  • Quickly ready for operation through rapid intervention via the hose reel
  • Excellent extinguishing efficiency using high pressure - low amount of water needed
  • Space saving installation
  • Good addition for fire fighting vehicles with portable pumps

Technical data

High pressure fire pump H5
  • 4-stage centrifugal pump as high pressure pump
  • Output up to 500 l/min at 40 bar
  • Sealing via maintenance-free mechanical sealing
  • Design of the high pressure pump as centrifugal pump
  • Thus making it resistant to contamination
  • Smaller pressure surges through flat pump characteristics

Installation

High pressure fire pump underfloor - Rosenbauer

The H5 high pressure pump can either be installed in the rear-mount or underfloor.

Its small size opens additional space for the equipment room. Furthermore, a portable pump can be installed as the perfect addition.

High pressure pump as centrifugal pump

  • Resistant to contamination - low amount of maintenance needed
  • Continuous water supply - in comparison to piston pumps, for example
  • Smaller pressure surges thanks to flat pump curve

Piston priming pump (PPP)

  • KAP Professional
  • Automatic priming

Thanks to the unique drive system, the priming pump is always on stand-by to reduce wear and can be switched on at any time.

  • High priming performance
  • Safe to operate thanks to oil bath lubrication and inlet/outlet valves made from extremely resistant plastic
  • Resistant to waste water
  • Fail-safe thanks to dual piston redundancy

The priming pump is driven over a V-belt from the lantern or the gear-box. During the priming process the belt is tensioned via a lever. Once the priming process finishes, the belt is released.

Absatz drucken

The optional automatic priming system offers maximum operational safety during water supply.


The priming process starts automatically - the V-belt will be tensioned for this. When the pressure builds to about 1.5 bar inside the pump, the priming process is stopped by an extending cylinder that loosens the belt.

Absatz drucken
Übersicht