RM15 turret
The RM15 turret is a compact, electronically controlled turret, which is especially suited for operation in tough environments. The RM15 is available as a water, foam, or powder turret.
With flow rates of up to 2,000 l/min, the turret achieves throw ranges of over 60 m without any significant drift losses. It is ideal for tight installations thanks to its compact design. Its simple and intuitive operation contributes to its safe control.
The RM15 has been proven hundreds of times in both stationary and mobile operations.
RM35 Turret
The RM35 is a compact, electronically controlled turret for protecting storage areas, waste bunkers, airplane hangars, helicopter landing sites etc. The RM35 is available as a water or foam monitor, or as a powder monitor or combined foam/powder monitor (ChemCore).
It achieves high flow rates of up to 4,750 l/min water or water-foam compound mixture (at 10 bar). Also, this turret model impresses with its compact design and very simple and intuitive operation.
RM80 turret
The RM80 too is an electronically controlled turret for protecting storage areas, airplane hangars, helicopter landing sites etc. The RM80 is available as a water or foam monitor, or as a powder monitor or combined foam/powder monitor (ChemCore).
The turret achieves high flow rates of up to 9,500 l/min or water-foaming agent mixture (at 10 bar).
- These turrets can be connected to an infrared temperature monitoring system. This allows targeted extinguishing to be carried out when a hot spot is detected.
- The turrets are equipped with an oscillating function. This means that the turret runs along a rectangle pattern, the size and position of which are freely definable, and as a result enables fully automatic operation for full-coverage extinguishing.