Certified as to EN469:2005 (highest performance level Xf2, Xr2, Y2 and Z2) and EN 1149-5
This garment is only one part of a combined protective clothing acc. to EN 469
The firefighter jacket alone fullfills the requirements for visibility according EN 469:2005+ A1:2006 pt. 6.14 + annex B


  • Outer fabric: the outer shell is made of flame- and heat resistant 37 % PBI/ 61 % paraaramid/2  % Belltron, 205 g/m², gold
  • Moisture Protection: PTFE-DUO membrane onto Melaminresinfiber/Aramide non-woven carrier 105 g/m²
  • Safety Thermal Lining: Melaminresinfiber/Aramide nonwoven material with quilted cover layer of mixed aramid/ viskose fabric 180 g/m²
    • Comfortable, ergonomic designed protective jacket with high protection and many features
    • Arm and jacket seams with moisture blocker made of flame retardant Polyurethan coated aramid, therefore better protection against the penetration and soaking of water (anti-wicking barrier)
    • Highly resistant quick open zipper with double cover flap
    • with tunnel for installation of and additional belt IRS (integrated rescue system)
    • with zipper at the end of jacket to make it easier to install belt
    • Ergonomic shaped ellbows and aditional protection made of black coloured, siliconcarbon coated Paraaramide fabric
    • Flame protection collar, on the backside to wear up to the helmet bottom, closure with Velcro fastening at the front
    • Shoulder area with extra heat protection
    • On back side with fleece strip for lettering 38 x 8 cm
    • Sleeves width can be adjusted individually due to Velcro
    • Sleeves with NOMEX® knitted wristlet with thumb hole
    • Two breast pockets for radio
    • With two side pockets with flap; under each side pocket flap with ring for attaching gloves
    • On inner side of jacket with set up pockets
    • With lampholder on front cover
    • 15 x 2,5 cm fleece strip above left radio pocket for name strip
    • With flap left hand side and right hand side for holding microphone
    • Inspection opening with zipper to check status of membrane
    • jacket with 5 cm wide silver and 5 cm (7,5 cm)  wide yellow/silver/yellow refelctive strips
      jacket alone fulfill requirement acc. annex B of EN469:2005  requirements for visibility
    • Sleeves and collar with silver reflevtive braid
    • Backside length 85 cm (size 52-54C)
    • Available sizes: 40-42 to 64-66 each in lengths A (body size 156-164 cm), B (body size 164-172 cm), C (body size 172-180 cm), D (body size 164-172 cm) and E (body size 188-196 cm)

     Weight: 1,63 kg (size 48-50C)

    numéro d'article 141252