SC 258 E2
Combi tool and handy all-rounder – cutting and spreading with a single
tool, higher cutting class, lighter weighing and better balance.
·Successor model SC 258 E 2 will be replacing the SC 250 E2 with immediate effect.
·The rubber hand guard has been replaced by the multipart lever cover.
·The new slimmer D-handle is standing for more effective handling and an even better balance.
· The cutting class with round material per Euronorm could be elevated from „F“ to „G“.
· Weighing only 14.9 kg without battery, the SC 258 E2 will be positioned below the important 15 kg limit.
Cutting force up to: 63,000 lbf./280 kN
Round steel up to ø: 1.02 in./26 mm
Spreading force up to: 157,000 lbf./700 kN
Spreading force 25 mm from tips end: 7200 lbf./32 kN
Spreading distance: 12.6 in./321 mm
Pulling force up to: 7640 lbf./34 kN
Pulling distance: 13 in./330 mm
Dimensions: 34.4×8.5× 11.1 in./874×215×281 mm
NFPA classes: A6/B6/C6/D7/E7
EN cutting class: F
EN cutting performance: 1G – 2F – 3F – 4F – 5G
Protection class: IP 54
Weight: 32.6 lbs./14.9 kg