Certified as to EN 469:2005 (highest performance level Xf2, Xr2, Y2 and Z2) and EN 1149-5:2018, EN 61482-2:2009, EN 343:2003
This garment is only one part of a combined protective clothing acc. to EN 469


  • Outer fabric: the outer shell is made of X55 with PBI: 59% Aramid, 40% PBI, 1 % Antistatic (prevents electrostatic charges) colour gold/brown, 205 gr/m²

  • Moisture Protection: PTFE-DUO membrane onto Melaminresinfiber/Aramide non-woven carrier 105 g/m²
  • Safety Thermal Lining: Melaminresinfiber/Aramide nonwoven material with quilted cover layer of mixed aramid/ viskose fabric 180 g/m²


  • Comfortable, ergonomic designed protective jacket with high protection and many features
  • Arm and jacket seams with robust moisture blocker made of flame retardant Polyurethan coated aramid, therefore better protection against the penetration and soaking of water (anti-wicking barrier)
    Breathable 3-Layer anti wicking barrier at the end of sleeves and under front flap
  • Highly resistant zipper with quick release function and double cover flap
  • Special ergonomically shaped elbows and additional reinforcements made of flame-retardent, silicon-carbon coated paraaramid fabric 
  • Flame protection collar can be pulled up under the helmet, closure with Velcro fastening at the front
  • Shoulder area with comfortable shock and heat protection
  • On back side jacket with robust rescue loop made of double layer Nomex belt
  • Sleeves width can be adjusted individually due to Velcro
  • Sleeves with innovative NOMEX® knitted wristlet with thumb hole 
  • Radio pockets on both sides with safety closure flap
  • With two side pockets with flap; under each side pocket flap with strap with press button for attaching gloves
  • Comfortable designed side pockets under patched pocket with lateral zip opening
  • Two applied inside pockets
  • With practical paded handle pieces on all flaps
  • With lampholder on front cover 
  • 15 x 2.5 cm fleece strip above left radio pocket for attaching a name strip 
  • Holding loop for manual microphone on left and right side
  • Two inspection openings with zipper to check status of membrane on both sides
  • jacket with patched, breathable, segmented yellow/silver/yellow reflective stripes:
    5 cm wide vertically on front side and slightly v-shaped stripes vertical on back side. Stripes 7,5cm wide around torso, around outside sleeves on upper arm and und forearm
  • yellow reflective material on front side left and right
  • Back side, upper arm and collar with silver reflective braid
  • Backside length 85 cm (size 52-54C)

Sizes: 40-42 to 68-70 each in lengths A (body size 156-164 cm), B (body size 164-172 cm), C (body size 172-180 cm), D (body size 164-172 cm) and E (body size 188-196 cm)

numéro d'article 141436