High performance fans

FANERGY 

Protects the emergency crews. Saves lives.

Rosenbauer has redeveloped the mobile high-performance fans of the FANERGY series from the ground up. The result is multi-functional devices that can do much more than just ventilate. Protect buildings or objects with water mist, suppress dangerous gases, and even discharge foam. The new FANERGY offers many possibilities – also when extinguishing fires. The quick evacuation of smoke enables easy and rapid access, much better visibility, and reduced temperatures. In short: risk for the emergency crews can be significantly reduced by the use of a FANERGY high-performance fan, and the chances of rescuing people in smoke-filled buildings increases substantially.

Impresses with

  • All In One Airflow Technology
  • Powerful
  • Pull-out nozzle
  • Widest inclination angle of -20 to +20°
  • Flexible set-up distance of 2 - 7 m
  • Modern design
  • With water mist and foam use

Set up as a first attack device, the FANERGY fan ensures more safety in operation:

  • Better visibility through rapid smoke evacuation
  • Lower temperatures in the object on fire
  • Less harmful gases and immediate supply of fresh air
  • Shorter attack times
  • Quicker locating of missing persons
  • Less building damage and fire-fighting water damage

The FANERGY high performance fan is available in two sizes:

  • 16"
  • 22"
Design in detail
FANERGY 16"
FANERGY 22"

Drive with electric motor

The quiet and environmentally friendly alternative

FANERGY high performance fans with electric motors are quiet, environmentally friendly, and exhaust-free. They are available in two different sizes with 16" and 22" diameters. The output adjustment is regulated by a continuous controller from 0-100 %. The value can be comfortably read from a display.

Universally applicable and flexible in its positioning

The integrated starting current limiter ensures that the drive functions smoothly with a 5 kVA power generator. Both FANERGY models with electric motors can also be connected to any 230 V household socket. This makes them universally applicable and flexible in their positioning. Interior setup is possible without reservation.

Technical dataE22E16E16 COMPACTE16 Ex
Propulsion engine:230 V / 2.2 kW
Continuously adjustable
400 V / 1.85 kW
Air outlet diameter approx.:22"/560 mm 16"/410 mm 22"/560 mm 16 "/400 mm
Air flow rate:31,000 m3/h14,900 m3/h31,000 m3/h14,900 m3/h
Effective air flow rate (injection principle):> 61,000 m3/h> 30,000 m3/h> 61,000 m3/h> 30,000 m3/h
Dimensions (W x H x T), in mm:636 x 695 x 490545 x 545 x 490489 x 613 x 448569 x 460 x 630
Weight:approx. 50 kgapprox. 45 kgapprox. 40 kgapprox. 47 kg
Explosion protection:------------Ex II 3G C T3

Drive with combustion engine

The powerful version

The FANERGY high performance fan with combustion engine is the most powerful and lightest model. It is available in two different sizes with 16" and 22" diameters. Two engines are available: a 1-cylinder Vanguard 4.8 kW (6.5 hp) engine from Briggs & Stratton, or a Honda 1-cylinder GX200 4.8 kW (6.5 hp).

 

Technical dataV22V16
Propulsion engine:B&S 1 cylinder Vanguard 4.8 kW (6.5 hp) or Honda 1 cylinder GX200 4.8 kW (6.5 hp)
Air outlet diameter approx.:22"/560 mm16"/410 mm
Air flow rate:36,100 m3/h23,900 m3/h
Effective air flow rate (injection principle):> 63,500 m3/h> 50,000 m3/h
Dimensions (W x H x T), in mm:636 x 695 x 490545 x 545 x 490
Weight:approx. 46 kgapprox. 41 kg
Fuel/tank capacity:Lead-free gasoline >91 octane/approx. 3.0 l
Running time with one tank of gas:approx. 110 min at full capacity

All In One Airflow Technology

More pressure, more power, and more volume.

The All In One Airflow Technology from Rosenbauer is a completely new technological concept in ventilation technology. The special design of the fan unit results in an optimized air flow pattern. This is made possible by the special design of the fan impeller, fan control unit, and the special aerodynamically shaped grille. The new fan unit also ensures an even better drafting performance and thus a better air supply to the fan. The air is delivered into buildings in a targeted way with more pressure, more power, and more volume. The result: smoke is evacuated quicker from the object which is on fire, visibility is immediately better, and the temperatures are reduced more quickly.

Ventilate more efficiently with the pull-out nozzle

Automatic initial attack position from + 20°

When unfolding the handle, the fan unit automatically lifts out. In this way, the fan is immediately in attack position. The nozzle is therefore automatically in an optimized angular position of +20°, with makes it easier to get past obstacles in the access area of the building (e.g. stairs, platforms). In combination with the new All In One Airflow, the pull-put nozzle also ensures that the air flow reaches the object with maximum efficiency.

Maximum inclination angle -20 to +20 degrees

Widest adjustment angle on the market

The fan unit can be adjusted at the press of a button and without any accessories from -20 to +20 degrees. Thanks to the maintenance-free gas strut, continuous adjustment is quick and easy, without jamming and skewing - a significant benefit, which contributes to shorter rescue times during an operation. The generous inclination angle ensures more flexibility and efficiency when using the fan. The inclination angle of +20 degrees is very useful for blowing over obstacles. The negative angular position of -20 degrees – larger than any other fan on the market – is ideally suited to ventilate stairs and air shafts.

Flexible set up distance of 2 m to 7 m

For easy and safe operation

The use of a fan protects emergency crews and can save the lives of missing persons. Proper operation is important for successful ventilation operation. Thanks to the new All In One Airflow Technology, all current operating concepts are combined into one, and using it is easier than ever before. The fan can be placed at a flexible set up distance of 2 - 7 m in front of the access opening. Within this distance, the fan performs reliably without positioning problems. For maximum air flow, a set up distance of 2 m is recommended.


Operation is easier than ever before:

  1. Unfold handle
  2. Fan unit automatically swivels into the attack position of +20 degrees
  3. Place the fan in front of the access opening (flexible distance of 2 - 7 m)
  4. Switch device on - ready

Smallest dimensions

  • Smallest fan on the market in the 16'' class
  • Minimum space needed in vehicle
  • Optimized, easy handling

Safer option: LED light package

The LED light package is unique, which ensures more safety for operations in the dark. The LEDs arranged centrally behind the fan unit illuminate in the direction of the air opening and thus serve as an orientation aid for the SCBA crew. On the rear of the fan, other LEDs ensure good visibility of the operating elements, essential for safe operations. The LED light package is optional for all models.

Water mist and foam use

Multifunctional use

With regard to operational tactics, two further characteristics of the FANERGY fan are interesting: water mist as well as expansion foam can be produced. The mobile high-performance fan is equipped with a central water spray unit. This allows compartments, gas cylinders etc. to be cooled and protected. An effective suppression of dangerous flue gases is also possible using the water mist.


Turbulence in the air flow is reduced through the central placement of the water spray unit in the center of the fan nozzle. Handling is much quicker, easier, and without any accessories. The fire hose can be connected directly to the fan via a Storz C-connection, the FANERGY supplied with water, and thus spray mist discharged.

The fan as foam generator

With the use of a foam net, the Z2 proportioner, and multi-application foam compound, the fan can produce expansion foam in no time. The net is stored in a small compartment directly on the chassis of the fan and can always be carried along in this way. The flow rate is approx. 200 l at 7 bar. When fighting fires, the expansion foam can be introduced via an air tube in a staircase or via a light shaft in a cellar room. Also for hazmat operations, to suppress toxic vapors, or for cooling of equipment: the fan performs valuable services as an expansion foam generator.

Standard equipment and accessories

Standard equipment

  • Water vapor cartridge, as standard or retrofit
  • Storage compartment for foam net
  • Adapter for exhaust hose for Briggs & Stratton or Honda engine
  • Two chocks

Options and accessories

  • Water vapor cartridge, integrated with Storz C-coupling
  • LED light package
  • Foam net
  • Z2 proportioner with Storz C coupling
  • Suction hose 25 mm/1.5 m for Z2 proportioner
  • Discharge hose, SYNTHETIC SPECIAL 5 m, with Storz C coupling
  • Multi-application foam compound
  • PAE air tube with belt, 20 m
  • Stable air tube, 3 m
  • Service hour meter and revolution counter for cooling fans with combustion engines
  • Forcible entry tool

Maintenance-free components

  • Gas strut
  • Electric motor

Ordering data for FANERGY

list of request

Accessories for FANERGY

list of request