Electrical power

• Artificial mains network 60 kVA (for vehicles with built-in pumps) or 80 kVA (for vehicles without built-in pumps)
• Firefighting equipment (compressed air foam system) up to 30 kVA (corresponds to approx. 3,000 l/min air volume)

The result (depends on the chassis) is a usable electrical output of at least 60 kVA up to a maximum of 90 kVA.

Flexibility in the bodywork

• The truck mounted generator ensures a perfect adaptability to the needs of customers
• Control box (acc. to DIN 14686) positionable depending on payload/equipment
• Power strips positionable depending on payload/equipment
• Additional sockets (32 A/63 A)
• Rapid power intervention via hose reel

Tested up to maximum capacity

• Own test stand for EPS
• Endurance testing at maximum output
• Testing of insulation monitoring
• Testing the control accuracy of the converter (load shedding)

Compliance with standards

• Control box according to DIN 14686
• System according to VDE 100

The core - the generator with converter

• Truck mounted generator with maximum output of 140 kVA
• Installation in the chassis frame, in front of or behind the rear axle
• Direct drive from PTO of the chassis
• Integrated converter - output 650 VDC
• Inverter in the bodywork - output 400 VAC

Artificial mains network with control boxes and sockets

• Artificial mains network enables 5-phase alternating current for the operation of all devices
• Control box according to DIN 14686 with master electrical load switch for the generator system
• Sockets 16 A/230 V, 16 A/400 V and 32 A/400 V on the vehicle. Optional 63 A/400V

Operation of the EPS system

• Main switch on the control box
• All operating elements on the pump operator's panel
• All indicators on the pump operator's panel
• Complete integration in vehicle operation

Firefighting equipment with 400 V drive

• DIGIMATIC 48 - Direct injection foam proportioning system, 0.1 - 48 l/min proportioning ratio, multiple systems possible per vehicle
• CAFS WR 15E- Compressed air foam system
• CAFS WR 30E- Compressed air foam system

• Operation of powerful light masts with 400 V illuminants on the vehicle
• Operation of multiple illuminated balloons or other illuminants for the large-scale illumination of an operation site

• DIGIMATIC 48 is independent from the vehicle electronics
• Power of 0.1 l/min to 48 l/min per proportioning system
• Proportioning rate between 0.1 % and 6 %
• Multiple DIGIMATIC 48 proportioning systems in a vehicle are possible. As a result, multiple injection points are usable simultaneously - independent of each other

• Compressed air supply completely independent of the pump speed
• Compressed air supply is also possible without running centrifugal pump
• CAFS WR 15E
• CAFS WR 30E
• Option SKY CAFS

• With a 60 kVA artificial mains network, a parallel 8/1 operation is possible using 10 submersible pumps; therefore, an output of > 10,000 l/min is possible!
• Operation of large contaminated water pumps is possible
• An EPS vehicle replaces large mobile power sets in cases of disaster

• Extinguishing water supply from a nearby body of water using submersible pumps
• Supply of the vehicle with sufficient extinguishing water for the built-in pumps
• Fast setup of a high-performance extinguishing water supply using submersible pumps

• Feed into buildings for an emergency power supply
• Fast recommissioning of critical infrastructure
• Bridging of power failures for production or cooling systems

• Operation of electrically operated warm water producers
• Use of compressed air foam - technology for the application of decontamination agents

• Electricity is the most universal type of energy
• The EPS system can supply every electrically operated device
• High output enables the use of even larger, more powerful consumers on the firefighting vehicle

Vehicle with built-in pumps

• 60 kVA artificial mains network
• Firefighting equipment (compressed air foam system) up to 30 kVA (corresponds to approx. 3,000 l/min air volume)

= 90 kVA total electrical power

Vehicle without built-in pump

• 80 kVA artificial mains network

= 80 kVA total electrical power

• 60 kVA total output (for vehicles with built-in pumps, independent of chassis)
• 80 kVA total output (for vehicles with built-in pumps, independent of chassis)
• Sockets 16 A/230 V, 16 A/400 V and 32 A/400 V on the vehicle. Optional 63 A/400V
• Connection of consumers to the vehicle possible, e.g. 400 V light mast

• PTO position in order to be able to actuate the generator
• PTO output restricts the maximum output of the system
• PTO speed restricts the maximum output of the system