Foam as needed

The Rosenbauer MIXMATIC industrial proportioning system is a direct injection foam proportioning system for industrial use that is vehicle-independent. Foam can be individually mixed, per outlet, from 1% to 7%. A centrifugal pump is used as foam concentrate pump, driven via an extra diesel engine.

Impresses with

Water pump free of foam
Large foam compound volumes
Individually adjustable proportioning rate per outlet
Foam compound output independent of vehicle type
Usage of different foam compound sources

Function

Industrial foam proportioning system MIXMATIC - Rosenbauer

Own foam concentrate pump with drive
The foam concentrate pump drive is regulated so that the pressure on the foam side always remains at 0.5 bar above the pressure on the water side
Venturi proportioners on all outlets adjust the quantity of foam compound to the corresponding water quantity
Individually adjustable proportioning rate per outlet
Proportioning rate continuously adjustable from 1% - 7%
Easy operation thanks to Rosenbauer LCS
External suction
Foam compound tank filling possible

Proportioner per outlet

One foam compound valve and one proportioner are installed on each outlet. This means you can individually adjust the proportioning rate per outlet, between 1 and 7%.

Proportioner sizes with corresponding output (in liters):

The corresponding proportioner must be installed according to water flow.

1 1/2" : 75 to 340 l/min
2 1/2": 380 to 1,200 l/min
4": 1,320 to 4,500 l/min
6": 2,570 to 9,500 l/min

Foam compound pump

Centrifugal pump with 450 l/min or 700 l/min at 16 bar
With gunmetal housing and gunmetal impeller, shaft made from stainless steel
Driven via an extra diesel engine - no drive necessary from the vehicle
The foam compound can be supplied either from up to two foam compound tanks or from an external foam compound source
Foam compound pumps can also be used to fill the foam compound tank and to supply other vehicles

Options

Various sizes of the foam compound pump (800 lpm or 1,200 lpm at 17 bar or 240 lpm on request only)
Foam compound tank filling after operation
Different number and sizes of outlets
Foam compound pressure outlet to supply other vehicles

Operation

Operation via LCS 2.0 operating system - best implementation in vehicle and pump operation or via switches (from Kraus & Nehmer)
Selection of foam compound source or the foam compound tank filling via the control panel
Setting the proportioning rate manually directly on the outlet or via the display for the turret (for LCS 2.0 operation)

Image gallery

zoom

Download

Contact

Still have questions? We are gladly at your disposal for any individual suggestions or requests. Please provide us with some more details in the following form. This will help us to answer your inquiries more quickly.

Send form

MIXMATIC

Industrial direct injection foam proportioning system