Flash CAFS also achieves best-of-breed foam quality and extended drainage times in airport applications.
For AFFF and FFFP, these expansion ratios and drainage times can be achieved using just an O-stream nozzle, i.e. no foam barrel is required.

Four 50 l compressed-air cylinders (300 bar) are required for 12,000 l of water/foam compound mix.

• Long throw range
  Exit speed is increased by expanding air component
  80m with CAFS at 4750 l/min, 10 bar and 30° attack angle
  75m with CAFS at 5000 l/min, 10 bar and 10° attack angle
• Flat, straight jet
  allows for vastly improved visibility and targeting accuracy; less susceptible to wind gusting
• Foam quality
  Expansion ratio > 1:5 for AFF, FFFP with a drainage time of at least 2.25min possible: ER 8 at 5min drainage time and throw range greater than 85m
• Foam adhesion
  Excellent adhesion to vertical surfaces
• Flow rate presets
  4 flow rate presets supported with RM60 O-stream nozzle 100% water, 50% water, as well as 100% CAFS and 50% CAFS
• Infinite full and spray jet adjustment option
• Simultaneous CAFS operations with main and bumper turrets

• Flash CAFS 250 for ROSENBAUER RM60 turret with 4 water flow positions
• Flash CAFS 100 for ROSENBAUER RM25 turret
• Flash CAFS 50 for ROSENBAUER RM15 turret
• Flash CAFS 30 for discharge outlets and ROSENBAUER RM8 turret